|
High pressure of pump
Power type output pressure 700kg/cm2 10000PSI
- Quick output oil finished by two-section of high-low pressure; turbine type of suction oil to reach the most effective oil capacity.
- Single hole type of in-out oil controlled. To suit the terminal pressed, cable cut, punched, distributed/equipped electric tray and so on over fifty functions. \
- The pressure safe valve overloading protective equipment can avoid overloading ruined or it will release pressure reach 700kg/cm by auto.
CTE-25AS |
Characters:
- Low pressure 200 cuin/min @ 0-200 PSI
- High pressure 20 cuin/min @ 200-10000PSI
- Voltage 110V-220V/50-60HZ Accessory: with 2M hose which can be increased length.
- Ues R32 special circle oil or SHELL T46, ISO-SVG-46
|
FEP-SSJ
|
Characters:
- Suitcase for carry easily.
- Electric current indicating light
- Fuse wire loading protective quipment
- 360°of revolving direction oil.
- Voltage: 110V-220V/50-60HZ
|
Figure for size(mm)
|
Model
|
Oil storageGAL
|
Oil CapacityCC
|
A
|
B
|
C
|
D
|
|
CTE25AS
|
1 GAL. (4000cc)
|
3000
|
237mm 9 11/32"
|
166mm 6 17/32"
|
365mm 14 3/8"
|
148mm 5 13/16"
|
|
FEPSSJ
|
1 GAL. (4000cc)
|
3000
|
350mm
|
120mm
|
225mm
|
|
Figure for specification
|
Model
|
Max. Output2(kg/cm2 / psi)
|
Output pressure2(kg/cm2 / psi)
|
Oil per minute (cc)
|
Operation
|
Body weight (kg)
|
Screw
|
Remarks
|
|
CTE-25AS
|
700/10,000
|
Low 0-20 High 20-700
|
Low 2.6L High 0.32L
|
Electromagnetic Type
|
15.2
|
PT 3/8"
|
Can match a generator for operation in the outside.
|
|
FEP-SSJ
|
700/10,000
|
Low 0-20 High 20-700
|
Low 2.6L High 0.32L
|
Electromagnetic Type
|
14.3
|
PT 3/8"0360 revolving
|
- This design is for single-hole-operative pump with high, low of two section quick oil output.
- Even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones.
- They have foot and hand types with 2M hose which can order to extent its length.
- Pressure can be kept to stop. The inside of this pump is designed with safe high pressure of protective released valve.
- CP-700-2A and CFP-800 are equipped with large oil capacity which are used to bend tubes or 50 ton of rectanglehydraulic cylinder.
∗Please note: large ton or rectangle hydraulic cylinder must choose this type.
|
|
|
|
|
CP-700 Hand pump
|
CP-700-2A Hand pump
|
CP-180 Mini hand pump
|
|
|
|
|
|
CFP-800 Foot pump
|
CFP-800-1 Foot pump
|
|
Characters:
- Output pressure for operating is 700kg/cm2 10000PSI.
- Two speed of high/low pressure.
- Enclosed 2M hose, quick speedy coupler.
- PT 3/8" spiral.
- One aluminum material of returning oil switch.
- Have to change oil every half of a year.
- Use R32 industrial oil ISO-SVG-46 special circle or SHELL T-15.
Figure for specification
|
Model
|
Max. Output pressure2(kg/cm2 / psi)
|
Output pressure(psi)
|
Oil per minute
|
Oil storage (cc)
|
Weight (kg)
|
Size(LxWxH) (mm)
|
Remarks
|
|
Low
|
High
|
Low
|
High
|
|
CP-700
|
700 / 10,000
|
350
|
10,000
|
13
|
2.3
|
900
|
10
|
510x140x150
|
Hand type
|
|
CP-700-2A
|
700 / 10,000
|
350
|
10,000
|
13
|
3.1
|
2,100
|
17
|
590x120x150
|
Hand type
|
|
CFP-800
|
700 / 10,000
|
350
|
10,000
|
13
|
2.3
|
1,200
|
18
|
630x200x240
|
Foot type
|
|
CFP-800-1
|
700 / 10,000
|
350
|
10,000
|
13
|
2.3
|
400
|
14
|
390x150x250
|
Foot type
|
|
CP-180
|
700 / 10,000
|
|
10,000
|
|
2.3
|
220
|
4
|
340x80x120
|
Hand type
|
|
